ASV SR-70 Wartungshandbuch PDF herunterladen (Seite 48)

Seat

Removal

1. Remove the bolts (2) securing the cab to the chas-

sis. They are located inside the cab in the upper

front corners of the foot well. (fig. 6-15)

2. Raise and secure the cab as described on page 4-

2 of this manual.

3. Remove the four nuts securing the seat to the cab.

4. Remove the seat partially to expose the seat

switch harness located behind the seat. (fig. 6-17)

5. Disconnect the harness and then remove the seat

from the machine. (fig. 6-18)

Installation

1. To install the seat, reverse the removal procedure.

Rear Interior Panel

Removal

1. Remove the screws holding the rear panel to the

cab. (fig. 6-19)

2. Disconnect the rear power point from the harness,

then remove the panel from the cab. (fig. 6-20)

Installation

1. To re-install the rear interior panel, reverse the

removal procedure.

Required Tools

Combination/Socket Wrench

6-15

6-18

6-16

Required Tools

Phillips Type Screwdriver

6-17

6-19

6-20

Rubber Track Loader

6. Operator Enclosure

6-4

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 140 141

Keine Kommentare

ASV SR-70 Wartungshandbuch Seite 48