ASV SR-70 Wartungshandbuch PDF herunterladen (Seite 102)

4. Remove the bolt securing the lower pin to the

quick attach. (fig. 14-10)

5. Remove the bolt securing the upper pin to the lift

arm weldment. (fig. 14-11)

6. Disconnect the outer quick attach cylinder hose (if

equipped) to allow the lower pin to be removed.

(fig. 14-12)

7. Use a pry bar to slide the lower pin out of the cylin-

der end allowing it to be removed. (fig. 14-13)

8. Use a pry bar to pry the lower cylinder eyelet out

of the upper Q/A mount as shown. (fig. 14-14)

9. Use a hammer and a brass punch to tap the upper

pin most of the way out of the lift arm weldment.

(fig. 14-15)

Note: Make sure to support the cylinder (have an

assistant support it if necessary) while removing the

upper pin to prevent it from falling and being damaged

or from causing injury to anyone standing underneath.

14-4

Rubber Track Loader

14. Lift-Arm Components

14-10

14-11

14-12

14-13

14-14

14-15

Disconnect

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 140 141

Keine Kommentare

ASV SR-70 Wartungshandbuch Seite 102