ASV SR-70 Wartungshandbuch PDF herunterladen (Seite 101)

7. Remove the cylinder from the machine for service

or inspection. (fig. 14-7)

Note: At this time the pivot bushings and pivot pins are

easily accessible for replacement. Inspect them for vis-

ible wear or damage and replace them as necessary .

Installation

1. To install the lift arm cylinder, reverse the removal

procedure.

Bucket/Tilt Cylinder

Removal

1. Raise the lift arms and support them with the lift

arm brace as described on page 4-1. (fig. 14-8)

2. Place a suitable catch container beneath the cylin-

der fittings, then disconnect the inlet and outlet

hoses from the cylinders. (fig. 14-9)

3. Cap and plug the hoses and fittings to prevent fluid

loss and or system contamination.

14-3

Rubber Track Loader

14. Lift-Arm Components

14-7

Required Tools

Socket Wrench

Combination/Open End Wrench

Hammer

Punch (brass)

14-8

14-9

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 140 141

Keine Kommentare

ASV SR-70 Wartungshandbuch Seite 101